Making a Prosthetic Limb - ( BK Prosthetic Leg ) - Rehabilitation Engineering Project

Abstract.

A prosthesis (also called a prosthetic limb, artificial limb, or limb "replacement" though natural limbs are irreplaceable) is an artificially made substitute for a limb lost through a congenital defect (present at birth), accident, illness, or wartime injury............

In theory, any part of the body from ear or nose to the finger or toe could be replaced by a prosthesis. In practice, there are four common types of prosthetic limb, which replace either a partial or complete loss of an arm or leg:

1. Below the knee (BK, transtibial): An prosthetic lower leg attached to an intact upper leg.
2. Above the knee (AK, transfemoral): A prosthetic lower and upper leg, including a prosthetic knee.
3. Below the elbow (BE, transradial): A prosthetic forearm.
4. Above the elbow (AE, transhumeral): A prosthetic lower and upper arm, including a prosthetic elbow. 

In this project the procedure of making the BK prosthetic leg from Collecting the patient's data, Casting Room, Modification Room, etc are considered........

For further Project Details,

Please Contact:

C. S. Gaston Ravin Dias

Email:- sam.gastondiaz@gmail.com

                                  (.....Please scroll down below to buy relevant products.....)